|It takes cutting 60 or more trees
to build a house with wood, that is not "Green" WALLPANEL system
does not use or need wood.
|The HIGHTHERM R24 - SUPERTHERM?/font>
R30 - or SUPERTHERMAL R60 true insulation wall
panels designed for commercial and residential applications, when
conservation is a must this system is designed to achieve a super
insulated stable structure that makes erecting residential building a simple task.
WALLPANEL?/font> is an innovative wall panel that can provide true
R60 Insulation with a mere 6 inches of wall thickness, any structure constructed with the
WALLPANEL?/font> system will save up to 75% of the energy needed
to heat or cool the building.
All this at a lesser total construction cost than
coating is a unique one-part insulation coating composed of blend of nano acrylics and resin
additives formula. MULTICERAMICS?/font>
provides R equivalent "RE" insulation and great surface finish, it has no VOCs, utilizes
different types and sizes of ceramics that block 95% of the sun's radiant
heat visual light, ultra violet rays and infrared rays. MULTICERAMICS?/font>
is a permanently flexible "breathing" membrane that stops water
penetration, and prevents corrosion and surface deterioration with two
additional advantages over other ceramic insulation coatings.
has Micro Packing, No Fade, Nano and Cool Touch
technologies. It can save thousands every year in energy savings.
| ACRYLIC STUCCO is a mixture of
high- performance ceramics insulation acrylics specially blended for breath-ability, adhesion,
and toughness. Added in the formulation is a special ceramic and aggregate
compound to insure a stucco texture surface but with the added
characteristics not found in standard dry mix ratios of stucco. It is not
affected by water or moisture-penetration, and is designed to stay down
for a long bonding life. It will not crack and peel. It is UV-protected
for long life and durability against weathering whether in hot or cool
climates or under high humidity or very dry. It is tough and durable to
provide years of service and added beauty.
Coating?/font> will stop condensation of
chilled or freezing lines with just a 1/8" of an inch, this special
ceramics insulation coating
is so efficient that can achieve very high insulation at less than half
the thickness required by other insulation coatings.
is water borne to offer a non-flammable, no toxicity formula and zero VOCs
for high heat or freezing applications . The Nano technology used in this
coating offers a "micro-packing" ceramic set that is required for quick
adhesion while at the same time offering a formulation to immediately calm
the heat conduction from the surface of the pipe to give better insulation
to any surfaces.
| Clear-Coat is produced in two
distinctive formats, a single component and a two-part Nano Technology
"0" VOC aliphatic polyurethane enamel that forms a uniquely hard
and durable coating film. This self-leveling coating is resistant to
water, acids, solvent and impact. Clear-Coat is a one-coating
system. Clear-Coat can be applied to metal, concrete, masonry, wood
and many other substrates that need UV control, anti-microbial,
anti-graffiti, or simply a tough clear coating to enhance and beautify any
is a one-part polyurethane coating that contains no VOC's or known
carcinogens. Upon curing, RUSTVACCINE?/font>
provides a protective coating of superior adhesion, flexibility,
abrasion- and impact-resistance. It is resistant to most chemical solvents
and acid splash.
RUSTVACCINE?/font> can be used as a primer
or a stand-alone coating. RUSTVACCINE?/font>
can be tinted to any color and can serve as a finished top coat as well as
a primer. Can encapsulate other paints and other toxic materials. RUSTVACCINE?/font>
can be applied directly over cleaned flash rust or most firmly bonded
paints. In most cases, no metal blasting is required.
The MARBLE-EMULATION Coating is produced in two distinctive
formats, a single component and a two-part Nano Technology "0"
VOC aliphatic polyurethane enamel that forms a uniquely hard and durable
coating film. This self-leveling coating is resistant to water, acids,
solvent and impact. MARBLE-EMULATION is a system. MARBLE-EMULATION
can be applied to metal, concrete, masonry, wood and many other substrates
UV control, anti-microbial, anti-graffiti, or simply a tough clear coating
to enhance and beautify any surface.
The significant Difference :
eliminates compliance concerns.
Walls are very fast and easily
erected with minimum personnel.
The panels are of the standard 4" or 6" thickness.
The studs are at the standard 16" on center spacing.
The design makes it possible to
meet the 16" on center studs and
Trusses at 24" on
center without top plates for load
Pre-cut electrical carriers.
Pre-molded central vacuum lines
cavities that are self aligned from panel to panel.
Pre-Molded high velocity heating
air condition lines.
Consistent high R 30 - 40 - 60
values without decay.
Meets or exceeds the requirement
of all major building codes.
- The fastest build up
- Uncomplicated efficiency and highest insulation
per inch of thickness
- No special engineered panels are ever needed
- Roof systems for simplicity and incredible sound
and insulation comfort
- Attic less residential are incredibly easy to install
- WALLPANEL is the most economical system available
Contact our offices for a distributor near you.
All other inquires can be made via Email or:
International inquires can be directed to our corporate
headquarters by calling 928-776-2910
For dealerships in the United States call our toll free 888-WALLPNL (888-925-7265).